English - 10
Connecting to a PC and Audio device
¦ Available devices: digital audio system, amplifier, DVD home theatre
Using an Optical (Digital) or an Audio Out Connection
✎
DIGITAL AUDIO OUT (OPTICAL)
x
When a digital audio system is connected to the DIGITAL AUDIO OUT (OPTICAL) jack, decrease the
volume of both the TV and the system.
x
5.1 CH (channel) audio is available when the TV is connected to an external device supporting 5.1 CH.
x
When the receiver (home theatre) is set to on, you can hear sound output from the TV’s optical jack.
When the TV is receiving a DTV signal, the TV will send 5.1 CH sound to the home theatre receiver.
When the source is a digital component such as a DVD / Blu-ray player / cable box / STB (Set-Top-
Box) satellite receiver and is connected to the TV via HDMI, only 2 CH audio will be heard from the
home theatre receiver. If you want to hear 5.1 CH audio, connect the digital audio out jack from your
DVD / Blu-ray player / cable box / STB satellite receiver directly to an amplifier or home theatre.
✎
AUDIO OUT: Connects to the audio input jacks on your amplifier/DVD home theatre.
x
When connecting, use the appropriate connector.
x
When an audio amplifier is connected to the AUDIO OUT jacks: Decrease the volume of the TV and
adjust the volume level with the amplifier’s volume control.
OPTICAL
AUDIO IN
R-AUDIO-L
DVD home theater connection
Audio connection
[PD6900-XY]BN68-03423A-01Eng.indb 10 2011-02-25 오후 8:38:51
To Next Page
Loading...
