Samsung QN Q65FNF Series - Page 64

Activate Backlights Test 1. 
 9
If No BACKLIGHTS2.
 9 with ne test probe on left side of
connector only for safety
 SMPS.
If BACKLIGHTS ON BUT PANEL SECTION(S) OFF3.
 9 +-

 Panel.
 +
 SMPS
BACKLIGHT DIMMING PROBLEMS
 Menu£ Picture£ Expert Settings £ Backlight

 9 minus (-) pin voltagesANA-DIM
CNL801

 minus (-) pin voltagesANA-DIMSMPS
 ANA-DIMMain/T-Con Board.
Use: MUTE£ 4£ 1£ 9£ EXIT to test Panel Vertical Backlight Sections in normal operation mode.

