The image on your TV may differ from the image above depending on the model and geographical area.
If no wireless access point is found, select Add Network at the bottom of the list and enter the network name (SSID).
If your wireless access point has a WPS or PBC button, select Use WPS at the bottom of the list, and then push the WPS or
PBC button on your access point within 2 minutes. The TV will connect automatically.
To view or delete previously connected network names (SSIDs), move the focus to Manage Saved Networks, and then press
the Select button.
To disconnect Wi-Fi, select Disconnect in (left directional button) Settings All Settings Connection
Network Network Status. Try Now
Checking the network connection status
(left directional button) Settings All Settings Connection Network Network
Status Try Now
View the current network status.
Resetting Your Network
(left directional button) Settings All Settings Connection Network Reset
Network Try Now
Restore the network settings to the factory default.
- 10 -
To Next Page
Loading...
