3-5
3. Disassembly and Reassemble
Description & Screws Picture Description
8
Remove the DC VSS-PD BOARD.
NOTE
Replacing SMPS board
First Discharge Capacitors
(Discharge Tool : BN81-16292A )
Remove AC Power to the One Connect Box.1.
Remove One Connect Cable to the TV Main/ 2.
T-Con Board.
Connect the Discharge Tool on each lead of 3.
the large SMPS capacitors
The LED on the Tool will blink each time a 4.
discharge occurs.
CAUTION
Avoid touching the bottom of the board or
components to avoid shock.
Locking Fixing Hole
Locking
Slide to the right to release the board
Bottom chassis Guide Fixing Hole
To Next Page
Loading...
