Samsung QN55Q75CNF - Page 40

3-9
3. Disassembly and Reassemble
Description & Screws Picture Description
4
AnLEDlightindicatoronthetoolwillasheach
time a charge is removed.
IMPORTANT:
Connect Discharge Tool Across leads of each
large Capacitor to remove its charge.
5
Remove CNW803 - 20 pin Power Connector on
One Connect Power Supply.
6
Then remove 5 screws at each marked screw
location on the board.
7
LiftotheblackInsulatorSheettapedtothe
plate assembly at “PULL” marked location.
Be careful not to tear it.