17
- ASSEMBLY OF FRIDGE DOOR
18. Confirm openning and closing of the door.
19. After removing the screws, disassemble
the Stopper Door and Grommet.
20. Assemble each part by exchanging its
into the reverse side as below picture.
REVERSING THE DOOR SWING
Read these instructions completely and carefully
22. After removing the screw, dissemble the
Cover-Cap Door and Cover Hinge.
17. Assemble the assembled hinge and door to the
refrigerator as below picture. Don't forget to insert
washer with grease.
To Next Page
Loading...
