Samsung RB34C Series - Step-by-Step Pair Installation

English 69
Maintenance
Step-by-step instruction
NOTE
The alphabet letters on the gure and in the parenthesis are the same as those in the
accessories list.
1. Check the level of the oor.
- Use a level to check the level of the
oor where the refrigerator’s two
rear casters will be placed.
D
E
2. Place the A/S jig-sheet refs (D) and
check the level.
- Place the two provided A/S jig-
sheet refs (D) on the oor where the
refrigerator’s two rear casters will be
placed, and then check the level.
- If the oor is not level, put the
provided level adjustment pads (E)
under the A/S jig-sheet refs (D) so
the refrigerator will stand on a level
surface.
- Once you sort out all the necessary
parts to level, peel off the double-
sided tape on the bottom of each
part and attach the part in its nal
position.
Untitled-1 69 2022-12-13  2:28:16