Samsung RB34C Series - Page 70

Maintenance
English70
Maintenance
G
3. Attach the foams to maintian a gap
between the two refrigerators.
NOTE
You must attach the T5 PE foam (G) to the
BMF (Bottom-mounted freezer) model only.
(In case you install two different types of
refrigerators in pair.)
A. Pair install of RB38 model:
• Attach the T5 PE foam (G).
• See the gure for the position of the
foam.
G
F
B. Pair install of RB34 model:
• Attach the T5 PE foam (G), and then
attach four T7 LEX foams (F) on top of
the T5 PE foam (G).
• See the gure for the position of the
foams.
4. Align the two refrigerators.
- Check the alignment at the top and
front of the refrigerators and realign
them if necessary.
Untitled-1 70 2022-12-13  2:28:17