3-8 Samsung Electronics
No Parts Procedure Remark
2 EVAPORATOR & DRAIN-
PAN
5) Unscrew bolt and Separate Blower from
the motor. (Use +Screw Driver)
1) Detach EEV and Sensor connectors from
the PCB. (Use +Screw Driver)
2) Unscrew 8 screws and Detach Cover-Pipe.
(Use +Screw Driver)
3) Unscrew 31 screws and detach Cabinet-
Base Blower andCabinet-Base Drain.
(Use +Screw Driver)
To Next Page
Loading...