Samsung Repp SCH-R680 - Emergency Tone

Settings 89
Notification ringtone
Select a default ringtone for message, alarm, and other
notifications.
Tip: You can also set songs as alarm ringtones. (For more information, see
“Setting a Song as a Ringtone” on page 57.)
1. From the Settings menu, touch Sound settings ➔
Notification ringtone .
2. Touch a ringtone to hear a sample and select it.
3. Touch OK to save the setting.
Audible touch tones
When enabled, tones play for when you dial numbers on the
Phone Dialer.
1. From the Settings menu, touch Sound settings .
2. Touch Audible touch tones to enable or disable tones. When
enabled, a check mark appears in the check box.
Audible selection
When enabled, tones play when you touch the screen for
selections (other than the Phone Dialer).
1. From the Settings menu, touch Sound settings .
2. Touch Audible selection to enable or disable tones. When
enabled, a check mark appears in the check box.
Screen lock sounds
When enabled, sounds play when you lock or unlock the screen.
(For more information, refer to “Securing Your Phone” on
page 12.)
1. From the Settings menu, touch Sound settings .
2. Touch Screen lock sounds to enable or disable screen lock
sounds. When enabled, a check mark appears in the check
box.
Emergency tone
When enabled (the default setting) and during an Emergency
(911) Call, the phone plays a tone that emergency personnel can
use to locate your phone.
Caution!: When you are endangered by intruders, you should disable
Emergency tone before placing an Emergency Call.
䊳 From the Settings menu, touch Sound settings ➔
Emergency tone . The following options are available:
•Off : Disables Emergency tone playback.
•Alert : Enables Emergency tone playback.
•Vibrate : Your phone vibrates when you place an Emergency Call.