4
Section 1: Getting Started
This section describes information about managing
your device, maximizing its performance.
Setting Up Your Device
Installing the Battery
1. Remove the battery from its packaging.
2. Place your fingernail in the battery cover and
firmly “pop” the cover off the device (as
shown).
3. Insert the battery into the opening in the back
of the phone (3), making sure the connectors
align. Gently press down to secure the
battery (4).
4. Position the battery cover over the battery
compartment and press down until you hear a
click.
5. Press to turn the phone on.
•
If your phone is activated, it turns on, searches for
service, and enters standby mode.
•
If your phone is not activated, see
“Activating Your
Device”
on page 21.
To Next Page
Loading...
