Do you have a question about the Samsung RF260BEA Series and is the answer not in the manual?
Brand | Samsung |
---|---|
Model | RF260BEA Series |
Category | Refrigerator |
Language | English |
Activate Self-Diagnostic Mode by pressing Power Freezer and Fridge keys simultaneously for 8 seconds.
Diagnose FZ-Sensor error by measuring voltage between Main PCB CN30-"4" and CN76-"1".
Diagnose FF-Sensor error by measuring voltage between Main PCB CN30-"5" and CN76-"1".
Diagnose FZ-DEF-Sensor error by measuring voltage between Main PCB CN30-"5" and CN76-"1".
Diagnose FF-DEF-Sensor error by measuring voltage between Main PCB CN30-"8" and CN76-"1".
Diagnose Ambient-Sensor error by measuring voltage between Main PCB CN78-"8" and CN78-"12".
Diagnose Flex room-Sensor error by measuring voltage between Main PCB CN78-"9" and CN76-"1".
Diagnose Ice Maker Sensor error by measuring voltage between Main PCB CN90 #8 and #9.
Diagnose Humidity-Sensor error by measuring voltage between Main PCB CN30-"3" and CN76-"1".
Diagnose FZ-FAN error by checking voltage between Main PCB CN76-"3" (Yellow) and CN76-"1" (Gray).
Check for shorts, IPM voltage, and compressor connections when compressor fails to start.
Diagnose IPM fault by checking IPM voltage and compressor connections.
Check compressor connections and resistance of R308 for abnormal current detection.
Check compressor connections and resistance of R308 for motor locking or restriction.
Check compressor connections and resistance of R513 for low voltage conditions.
Check compressor connections and resistance of R501/R505/R509 for over voltage conditions.
Troubleshoot starting failure by checking Inverter PCB and compressor relay connectors.
Check system for restriction/refrigerant, then Inverter PCB for SPM Faults.
Check Inverter connectors and compressor for position failure issues.
Diagnose motor locked issues by checking compressor locking and input voltage.
Troubleshoot low voltage by checking compressor locking and input voltage.
Troubleshoot over voltage by checking compressor locking and input voltage.