ASSEMBLE THE FREEZER DRAWER
1. Pull out the rails to the full length on each side of the cabinet evenly.
r
2. Hang the freezer door front onto open slots on the sides.
_jSIot
3. Tighten four lOmm hex-head screws completely.
4. With the drawer pulled out fully, insert the lower basket (_[}) into
the rail system.
5. Hook the ends of the tilting pocket (_) into both brackets (_),
and push down until they lock into place.
12 Setti]g Up
DA68-O1812H.indb 12 2009.8.10 9:4:12 AM
To Next Page
Loading...
