Samsung RF265AARS RF266AARS RF26NBRS1RF265AABP RF266AABP RF26NBBP1RF265AAWP RF266AAWP RF26NBSH1RF265AASH RF266AASH

To Next Page

To Previous Page

TROUBLESHOOTING

1) For example, if you want to change freezer compartment standard temperature to 28.4 (-

2°C) by operating option, do as below.

This function is for changing the standard temperature.

In -2 (-19°C) of current temperature of freezer compartment, if you make the temperature

lower to 28.4 (-2°C) by the option, the standard temperature would be controlled -6 (-21°C)

Therefore, if you change the setting of temperature option to -2 (-19°C) on the panel, the

appliance will be operated with -6 (-21°C).

It means that standard temperature is controlled 28.4 (-2°C) less than setting temperature in

the display.

If the display changes to option setting mode, all displays will be off except freezer and

fridge compartments temperature display as below.

(Fresh food and freezer compartments case will be explained only because all options

are operated with the same method according to the option table.)

Code

Down

Reference

Value Down

Code

Reference

Value Up

Code

Reference

Value

-2℉(-19℃)is Recommended 38℉(3℃)is Recommended

①①

KEY control method after converting to option mode

󳢬 Key control in option mode

Power Freeze Key

Freezer Key

Power Cool key

Fridge key

Code Down key

Code Up key

Reference Value down key

Reference Value Up key

Reference ValueCode

Basically, option function has cleared data at shipping process.

Therefore, almost all setting value are "0".

Check the product information manual or specifications because setting value could be

changed particularly for the purpose of improving product at mass producing process.

NOTE

Samsung RF265AARS RF266AARS RF26NBRS1RF265AABP RF266AABP RF26NBBP1RF265AAWP RF266AAWP RF26NBSH1RF265AASH RF266AASH - Page 48