43
DISASSEMBLY AND REASSEMBLY
3-16) Vertical Hinged Section
Vertical Hinged
Section
Part Name How To Do Descriptive Picture
1. Remove 2 screw cap parts with
a flat-blade(-) screwdriver.
(Refer to the picture)
2. Unscrew 2 screws.
3. Disengage the internal housing
connector of the vertical hinge.
4. Remove the vertical hinged
section by lifting the vertical
hinge up.
(Refer to the picture)
Be careful not to scratch or
break the parts
CAUTION
AW3 SM-EN 2011.3.31 2:54 PM 페 이 지 4 3 i n
To Next Page
Loading...
