55
DISASSEMBLY AND REASSEMBLY
3-30) Electric Box
PBA Main
PBA SMPS
Part Name How To Do Descriptive Picture
1. Remove the ground screw 8
attached to the upper left and
right door hinges with a phillps
screwdriver(+)
2. Disengage all housing
connectors from the main PCB.
3. Remove the main PCB by
pushing the lower part of the
hook down.
4. Unscrew 2 PCB fixing screws.
5. Remove the main PCB by lifting
the upper part of the hook up.
(Refer to the picture)
1. Remove the SMCS PCB by
lifting the upper part of the hook
up.
AW3 SM-EN 2011.3.31 2:55 PM 페 이 지 5 5 i n
To Next Page
Loading...
