51
DISASSEMBLY AND REASSEMBLY
3-27) Electric Box
PBA Main
PBA SMPS
Part Name How To Do Descriptive Picture
1. Pull the refrigerator forward to
have enough space to work at
the rear side of the appliance.
2. Unscrew 2 screws of the PCB
cover.
3. Disengage all housing
connectors from the main PCB.
4. Remove the main PCB by lifting
the upper part of the hook up.
(Refer to the picture)
1. Remove the cover PCB and
then disengage the housing
connector connected with main
PCB.
Remove the SMPS PCB by
pushing the lower part of the
hook down.
To Next Page
Loading...
