Camera and Camcorder 144
Recording Mode
: allows you to set the recording mode to
either: For Send (limited by MMS size restrictions.), For
Save (limited only by available space on destination
location).
Settings
: allows you to customize your camera settings.
Choose the following options and touch .
Camcorder tab
:
•
Timer
: allows you to set a time delay before the camera
takes the photo or the camcorder begins recording video.
Options include: Off, 3 seconds, 5 seconds, or 10 seconds.
•
Quality
: allows you to set the image quality to: Fine,
Normal, or Economy.
•
Effects
: allows you to change the color tone or apply
special effects to the photo. Options include: None,
Black & White, Antique, Aqua or Negative.
•
White Balance
: allows you to set this option from the
following choices: Auto, Sunny, Cloudy, Fluorescent,
or Tungsten.
Settings tab
:
•
Review
: allows you to activate the instant review
feature where images are displayed immediately after
review (On or Off).
•
Start Sound
: allows you to set to Off, Beep, Look here:,
or 1,2,3!
•
End Sound
: allows you to set to Off, OK, Beep-beep-
beep, or Melody.
•
Audio Recording
: allows you to record audio while
recording video. Selecting Off, temporarily mutes the
microphone and records only video.
•
Memory
: allows you to configure the default storage
location for images/videos as either Phone or Memory
Card (if inserted).
Flash
: allows you to set the camera flash to Off, Auto, Only
This Shot or On.
Camcorder Resolution
: allows you to set the video size.
Brightness
: allows you to adjust the brightness level by
moving the slider across the page.
u960.book Page 144 Tuesday, July 14, 2009 10:41 PM
To Next Page
Loading...
