22
LEVELING THE REFRIGERATOR
The doors will be uneven if the refrigerator is not level.
Case 1) Freezer door is lower than
the fridge door.
Insert a flat-blade screwdriver (-) (
➀
) into a slot of
the control lever (➁), turn it clockwise and level the
refrigerator.
Case 2) Freezer door is higher than
the fridge door
Insert a flat-blade screwdriver (-) (
➀
) into a slot of
the control lever (➁), turn it clockwise and level
the refrigerator.
Do not make small adjustments with the control lever, please refer to the next page.
HEIGHT DIFFERENCE
HEIGHT DIFFERENCE
➀ SCREW DRIVER(-)
➀ SCREW DRIVER(-)
➁ CONTROL LEVER
➁ CONTROL LEVER
Please level the refrigerator first.
NOTE
DA68-01606A-0.0 9/2/06 10:48 AM Page 22
To Next Page
Loading...
