Making small adjustments between doors.
If the door of the freezer is lowerthanthat of the
refrigerator.
If the door of freezer is higherthan that of the
refrigerator.
Adjustment part --
J
Pleaseopen the doors and adjust the doors as follows:
1) Release the nut (@)on the lower hinge until the upper end of the bolt ((_).
\djustment part
@ When yoU release the nut(C), use enclosed hex WrenCh(®) to turn the bolt(@)a little counter:
NOTE clockwise to makethe nut(@) loose with your fingers.
® WRENCH
® WRENCH
d) NUT
® NUT @ BOLT @ BOLT
2) Please adjust the height difference between the doors turning the bolt ((_) turn clockwise(_ ) or counter
clockwise( _ ).
(_= when you turn clockwise (v), the door goes up.
NOTE
f
® WRENCH ® WRENCH
#) BOLT
\
3) After adjusting the doors, turn the nut (@)turn clockwise
en the bolt again with the wrench ((_) to fixthe nut(@).
f
® WRENCH
@ BOLT
) until the lower end of the bolt, then tight-
® WRENCH
NUT
\
(2r
NOTE
d) NUT
@BOLT @ BOLT
If you do not fix the nut ((9)firmly, the bolt (@) maybe released:
25
To Next Page
Loading...
