18
Reattaching the Freezer Door
REATTACHING THE REFRIGERATOR DOORS
1) Reattach the freezer door by inserting the hose (
➀
) in the lower side of the door into the hole in the
lower hinge (➁) and pull the hose down.
2) Insert the upper hinge shaft (➂) into the hole (➃). After leveling between the upper hinge hole and the
hole of the cabinet, reattach hinge screws (➄) and ground screw (➅) in a clockwise direction.
3) Connect the wires. 4)
Put the front part of the upper hinge cover (
➆
)on
the front part of the upper hinge (➇) and reattach
from the front part of the upper hinge cover first.
DA68-01365A-1.0 5/3/06 9:59 PM Page 18
To Next Page
Loading...
