39
5. DISASSEMBLY AND REASSEMBLY
Reattaching the Freezer Door
1) Insert the lower hinge (
➀
) in the bracket lower
hinge (➁).
2) Reattach the freezer door by inserting the hose
(
➂
) in the lower side of the door into the hole in
the lower hinge (
➃
) and pulling the hose down.
3) Insert the upper hinge shaft (➄) into the hole (➅). After levelling between the upper hinge hole (➆) and
the hole of the cabinet
(➇).
Reattach hinge screws (➈) and gound screw (➉) in a clockwise direction.
4) Connect the wires. 5)
Put the front part of the upper hinge cover ( ) on
the front part of the upper hinge ( ) and reattach
from the front part of the upper hinge cover first.
12
11
To Next Page
Loading...
