48
This document cannot be used without Samsung's authorization
PRECAUTIONS(SAFETY WARNINGS)
Part Name Description Figure
LED Lamp
(Freezer)
1. Insert the (-) screw driver into the hook at
the back and pull the internal lamp cover
forward to separate it.
CAUTION
Take care not to scratch the cabinet
or damage the screw cover.
CAUTION
Be sure to unplug the power cord
before performing the operation
above.
2. Remove the connector from the LED
by lifting and then pulling it to the
direction of the arrow on the right.
3. Remove the connector from the LED
LAMP.
Cover Optical
LED
(Indoor Freezer
Only)
1. Insert the (-) screw driver into the hook at
the back and pull the internal lamp cover
forward to separate it.
CAUTION
Take care not to scratch the cabinet
or damage the screw cover.
CAUTION
Be sure to unplug the power cord
before performing the operation
above.
To Next Page
Loading...
