Samsung RS67N8211 Series - Page 78

78
This document cannot be used without Samsung's authorization
PRECAUTIONS(SAFETY WARNINGS)
7) Temp Display Option.
- This option is for temp display all on mode.
If user wants temp display always on, this option is solution.
Setting value
FZ
compartment
Code
Temp Display Option
0
Normal Display (Temp display
temporally on at use)
1 Always Temp Display On
2 Always Temp Display On
Set item Temp Display Option
Reference Fridge Room 7-SEG
Value 16
6) Minimum Comp RPM shifting.
- This option is rising minimum Comp RPM.
As this option is applied, Comp operation.
Setting value
FZ
compartment
Code
Comp RPM
0 No RPM Change
1 Minimum 2450RPM
2 Minimum 2450RPM
3 Minimum 2450RPM
Set item Minimum Comp RPM setting
Reference Fridge Room 7-SEG
Value 12