20
This document cannot be used without Samsung's authorization
PRECAUTIONS(SAFETY WARNINGS)
• Unplug the appliance before servicing or replacing electrical parts.
• Remove any foreign matter or dust from the power plug pins.
- Otherwise there is a risk of re.
• Do not use a cord that shows cracks or abrasion damage along its length or at either end.
• Do not plug several appliances into the same multiple power board. The refrigerator should always
be plugged into its own individual electrical which has a voltage rating that matched the rating plate.
- This provides the best performance and also prevents overloading house wiring circuits, which
could cause a re hazard from overheated wires.
• Do not install the refrigerator in a damp place or place where it may come in contact with water.
- Deteriorated insulation of electrical parts may cause an electric shock or re.
• In order to reduce the risk of electric shock the appliance must be properly grounded.
• Do not put bottles or glass containers in the freezer.
- When the contents freeze, the glass may break and cause personal injury.
• Do not store volatile or ammable substances in the refrigerator.
- The storage of benzene, thinner, alcohol, ether, LP gas and other such products may cause
explosions.
- NEED TOOL
Item How to use Pictures
Phillips Head Driver
Use for assembling and disassembling
of screw.
Flat Head Driver
Use for assembling and disassembling
of Beverage Station, Dispenser, Display,
Cover Lamp etc...
Magnet Use for checking of the F/R Fan.
Hexagon wrench
(4mm diameter)
Use for adjust Door Hinge Ref Up.
Box wrench (12mm) Use for disassemble the compressor.
Box wrench (10mm) Use for disassemble the hinge lower.
Spanner(19mm) Use for adjust the height of the door.
3-1. PRECAUTION
3. DISASSEMBLY & REASSEMBLY
To Next Page
Loading...
