59
This document cannot be used without Samsung's authorization
PRECAUTIONS(SAFETY WARNINGS)
■ To adjust the height of a door
The height of a door can be adjusted using the clamp nut and the height nut on the front bottom of each
door.
4-3-2. Adjust the door height as well as the door gap
B
A
A
A
1. Open the door to adjust, and locate the two nuts
(A) and (B) on the front bottom of the door.
2. With a 19 mm spanner, turn the clamp nut (A)
clockwise to loosen. Then, open the door, and do
the following inside the door.
- To raise the door, turn the height nut (B)
counter clockwise.
- To lower the door, turn the height nut (B)
clockwise.
3. When complete, tighten the clamp nut (A) by
turning it counter clockwise.
To Next Page
Loading...
