EasyManua.ls Logo

Samsung RSG257AA - Setting Up Your Refrigerator - Location and Movement

Samsung RSG257AA
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
8_ setting up
setting up your side-by-side refrigerator
GETTING READY TO INSTALL THE REFRIGERATOR
Congratulations on the purchase of your Samsung Side-By-Side Refrigerator. We hope you will enjoy the many
state-of-the-art features and efficiencies that this new appliance has to offer.
Selecting the best location for the refrigerator
Select a location with easy access to the water supply.
Select a location without direct exposure to sunlight.
Select a location with level (or nearly level) flooring.
Select a location with enough space for the refrigerator doors to open easily.
Allow sufficient space to install the refrigerator on a flat surface.
- If your refrigerator is not level, the internal cooling system may not work correctly.
- Overall space required in use. Refer to drawing and dimension as below.
When moving your refrigerator
To prevent floor damage, be sure the front levelling legs are
in the up position (above the floor). Refer to ‘Levelling the
refrigerator’ in the manual(page 12).
To protect the finish of the flooring, place a protection sheet,
such as packing carton under the refrigerator.
When installing, servicing or cleaning behind the
refrigerator, be sure to pull the unit straight out
and push back in straight after finishing.
at least
¼
at least
¼
Leg
Screw Driver
CAUTION
DA99-01746A(EN)-GGH.indd 8 2008.7.10 12:12:37 PM

Other manuals for Samsung RSG257AA

Related product manuals