Accessories
Filter Water Assy install Filter
Button
❶
POWER FREEZE
BUTTON
Speeds up the time needed to freeze products in the freezer. This can
be helpful if you need to quickly freeze items that spoil easily or if the
temperature in the freezer has warmed dramatically (For example, if the door
was left open).
❷
FREEZER BUTTON
Press the FREEZER button to set the freezer to your desired temperature.
You can set the temperature between 8°F and -14°F.
Recommended temperature is -4°F.
❸
ENERGY SAVER For better energy efficiency, press the ENERGY SAVER button. If
condensation occurs on the doors, turn the Energy Saver Energy Saver
Button function off.
When you change the filter, press and hold this button for 3 seconds to reset
the filter schedule.
❹
LIGHTING BUTTON
Press the LIGHTING button for the dispenser LED lamp to stay on.
❺
FRIDGE BUTTON
Press the FRIDGE button to set the fridge to your desired temperature.
You can set temperature between 34°F~46°F and Power cool.
Power cool will operate when the temperature is set lower than 34°F.
Recommended temperature is 37~38°F.
❻
ICE OFF BUTTON
Press the ICE OFF button to turn the ice making function off.
If press and hold this button for 3 seconds, all buttons will be locked. The
ICE TYPE button and the dispenser pad will not work either. To cancel this
function, press and hold this button again.
❼
ICE TYPE BUTTON
Press the ICE TYPE button to choose cubed or crushed ice.
➑
WATER BUTTON
Press the WATER button for water.
➍
➎
➏
➋
➌
➊
➑
➐
To Next Page
Loading...
