Installation
English18
Installation
STEP 3 Adjust the leveling legs
The refrigerator comes with 3 leveling
legs, 1 on the door and 2 on the unit. Level
the refrigerator by manually adjusting
the leveling leg (A) on the door and the
leveling leg (C) on the opposite side of the
unit. The other leveling leg (B) on the unit
is for stability purposes.
Turn the leveling legs clockwise to lower
the position, or turn counter clockwise to
raise.
CAUTION
• In all cases including door reversal, to
prevent the refrigerator from tipping,
make sure the leveling leg (A) on the
door is on the oor and fully supporting
the weight of the door.
• Using only 2 legs on the unit can cause
the refrigerator to tip over.
Leave the legs at least (A) mm from the
oor as shown.
• (A) 39 mm for RT18*
• (A) 43 mm for RT21*
Untitled-1 18 2021-05-25 2:18:44
To Next Page
Loading...
