Installation
English20
Installation
To assemble the water line installation kit
1. Shut off the main water source.
2. Insert the pipe clamp (B) and the shut-
off valve (C) into the cold water line (A).
3. Connect the water line installation kit
(A) to the shut-off valve (B).
To connect the water line to the refrigerator
WARNING
Make sure to connect the water line only to a potable water source.
There are several items you must purchase to complete this connection. You may nd these
items sold as a kit at your local hardware store.
Copper Tubing
•
1
/4” copper tubing
•
1
/4” compression nut (1 pc)
• Ferrule (2 pc)
Plastic Tubing •
1
/4” plastic tubing Molded end (Bulb)
Untitled-1 20 2021-05-25 2:18:44
To Next Page
Loading...
