1. Product
2
. Installation
Λ
Λ
1-1. Preparation for installation
When deciding on the location of the air conditioner with the owner, the following restrictions must be
taken into account.
(1) General
Do NOT install the air conditioner in a location where it will come into contact with the following elements:
◆ Combustible gases
◆ Saline air
◆ Machine oil
◆ Sulphide gas
◆ Special environmental conditions
If you must install the unit in such conditions, first consult your dealer.
(2) Moving the outdoor unit by wire rope
Fasten the outdoor unit by two 8m or longer wire ropes
as shown at the figure. To protect damage or scratches,
insert a piece of cloth between the outdoor unit and rope,
then move the unit.
Plate protection
cloth
Wire rope
DVM TM(chapter5-1)_E<03759 6/14/02 2:31 PM Page 2
To Next Page
Loading...