Screen Setup
5
71
5 Screen Setup
5.3 Sharpness
Make the outline of objects more clear or blurry. (Range: 0~100)
A higher value will make the outline of objects clearer.
This option is not available when Bright is in Cinema or Dynamic Contrast mode.
5.3.1 Configuring Sharpness
1 Press any button on the front of the product to display the Function Key Guide.
Next, press [ ] to display the corresponding menu screen.
2 Press [ ] to move to PICTURE and press [ ] on the product.
3 Press [ ] to move to Sharpness and press [ ] on the product.
The following screen will appear.
4 Adjust the Sharpness using the [ ] buttons.
5 The selected option will be applied.
To Next Page
Loading...
