91
Setup and Reset
6
6 Setup and Reset
6.7 Source Detection (Except S19E200NW / S19E200NY /
S22E200N / S22E200NY)
You can activate Source Detection.
The functions available on the monitor may vary depending on the model. Refer to the actual product.
6.7.1 Configuring Source Detection
1 Press any button on the front of the product to display the Key Guide. Next, press [ ] to display
the corresponding menu screen.
2 Press [ ] to move to SETUP&RESET and press [ ] on the product.
3 Press [ ] to move to Source Detection and press [ ] on the product.
The following screen will appear.
Auto: The input source is automatically recognized.
Manual: Manually select an input source.
4 Press [ ] to move to the option you want and press [ ].
5 The selected option will be applied.
To Next Page
Loading...
