82
Configuring Tint
7
7 Configuring Tint
7.2 Red
Adjust the value of the color red in the picture. (Range: 0~100)
A higher value will increase the intensity of the color.
This menu is not available when Color is in Full or Intelligent mode.
7.2.1 Configuring Red
1 Press any button on the front of the product to display the Function Key Guide.
Next, press [ ] to display the corresponding menu screen.
2 Press [ ] to move to COLOR and press [ ] on the product.
3 Press [ ] to move to Red and press [ ] on the product.
The following screen will appear.
4 Adjust the Red using the [ ] buttons.
5 The selected option will be applied.
To Next Page
Loading...
