What to do if the message 'Check Signal Cable' appears on Samsung S22C650P?
If the message 'Check Signal Cable' appears on your Samsung Monitor, first, ensure that the cable is properly connected to the monitor. Second, verify that the device connected to the monitor is powered on.
General| Brightness | 250 cd/m² |
|---|---|
| Contrast Ratio | 1000:1 |
| Response Time | 5 ms |
| Refresh Rate | 60 Hz |
| Aspect Ratio | 16:9 |
| Viewing Angle (Horizontal/Vertical) | 178°/178° |
| Speakers | No |
| Dynamic Contrast Ratio | Mega ∞ DCR |
| Resolution | 1920 x 1080 |
| Panel Type | PLS |
| Connectivity | HDMI, DisplayPort, VGA |
| Stand Adjustments | Tilt |
| VESA Mount | 100 x 100 mm |
| Power Consumption | 25 W |
General safety warnings and symbol meanings.
Safety guidelines for power cords and electrical hazards.
Safety measures for installing the monitor in various locations.
Crucial safety instructions for operating the monitor.
Guide to setting up the monitor, including stand and wall mounting.
How to connect the monitor to a power outlet.
Connecting the monitor to a PC via various cables.
Installing drivers for optimal resolution and refresh rate.
Configuring the monitor to its ideal screen resolution.
Adjusting PC display resolution settings.
Adjusting the overall brightness of the display.
Modifying contrast between light and dark areas.
Optimizing picture quality via preset modes.
Restoring all settings to factory defaults.
Preliminary steps before contacting support.
Troubleshooting common display problems.
List of supported resolutions and frequencies.
To Next Page
