Samsung S22D390H - Source Detection Setting

66
Setup and Reset
6
6 Setup and Reset
6.6 Source Detection
You can activate Source Detection.
6.6.1 Configuring Source Detection
1 Press any button on the front of the product to display the Key guide. Next, press [ ] to display
the corresponding menu screen.
2 Press [ ] to move to SETUP&RESET and press [ ] on the product.
3 Press [ ] to move to Source Detection and press [ ] on the product.
The following screen will appear.
 Auto: The input source is automatically recognized.
 Manual: Manually select an input source.
4 Press [ ] to move to the option you want and press [ ].
5 The selected option will be applied.
M
ENU
SETUP&RESET
AUTO
Off
Auto
Auto
Manual
Reset All
Eco Saving
Off Timer
PC/AV Mode
Key Repeat Time
Source Detection
Decide how input
sources will be
detected.