33
Screen issue
The power LED is off. The screen will not switch on.
Self Diagnosis to check that the product is working
properly.
The message Check the cable connection and the settings of the source device. appears.
If the monitor is in HDMI
select the
SystemPC/AV ModeHDMIPC or AV.
Not Optimum Mode is displayed.
This message appears when the signal from the graphics card exceeds the maximum resolution or
P.37 ).
The images on the screen look distorted.
The screen is not clear. The screen is blurry.
The screen appears unstable and shaky. There are shadows or ghost images left on the screen.
P.37 ) in this manual and the Information menu on the product.
Change the Response Time in the Display OSD to Faster or Standard depending on your application
and usage.
The screen is too bright. The screen is too dark.
Brightness and Contrast.
Screen colour is inconsistent.
Change the Color settings.
The colours on the screen have a shadow and are distorted.
Change the Color settings.
White does not really look white.
Change the Color settings.
There is no image on the screen and the power LED blinks every 0.5 to 1 second.
The product is operating in power-saving mode.
Text is blurry.
Control Panel
FontsAdjust ClearType text and change Turn on ClearType.
Video playback is choppy.
not optimised for the PC resource.
To Next Page
Loading...
