68
Setup and Reset
6
6 Setup and Reset
6.6 Key Repeat Time
Control the response rate of a button when the button is pressed.
6.6.1 Configuring Key Repeat Time
1 When the Function Key Guide appears, select [] by moving the JOG button UP.
Next, press the JOG button.
2 Move to SETUP&RESET controlling the JOG button UP/DOWN and press the JOG button.
3 Move to Key Repeat Time controlling the JOG button UP/DOWN and press the JOG button.
The following screen will appear.
Acceleration, 1 sec, or 2 sec can be selected. If No Repeat is selected, a command responds
only once when a button is pressed.
4 Move to the desired option controlling the JOG button UP/DOWN and press the JOG button.
5 The selected option will be applied.
To Next Page
Loading...
