Samsung S24D300B

81
Setup and Reset
6
6 Setup and Reset
6.4 PC/AV Mode (S19D300HY / S19D340HY / S20D300BY /
S20D300H / S20D340H / S20D300HY / S20D340HY /
S22D300BY / S22D300HY / S22D340HY / S24D300B /
S24D300BL / S24D300H / S24D340H / S24D300HL /
S24D340HL)
Set PC/AV Mode to AV. The picture size will be enlarged. This option is useful when you view a movie.
z This function does not support Analog mode.
z Supplied for the wide models only such as 16:9 or 16:10.
z If the monitor (when set to DVI or HDMI) is in power saving mode or is displaying the message
Check Signal Cable, press the MENU button to display the On Screen Display(OSD).
You can select PC or AV.
z The functions available on the monitor may vary depending on the model. Refer to the actual
product.
6.4.1 Configuring PC/AV Mode
1 Press any button on the front of the product to display the Key guide. Next, press [ ] to display
the corresponding menu screen.
2 Press [ ] to move to SETUP&RESET and press [ ] on the product.
3 Press [ ] to move to PC/AV Mode and press [ ] on the product.
4 Press [ ] to move to DVI or HDMI, and press [ ]. And press [ ] again.
The following screen will appear.
M
ENU
SETUP&RESET
Off
Acceleration
Auto
Reset All
Eco Saving
Off Timer
PC/AV Mode
Key Repeat Time
Source Detection
Set to AV to enlarge
the picture.
AUTO
PC/AV Mode
DVI
PC
AV
Select the PC/AV mode
for the DVI source.
AUTO
PC/AV Mode
HDMI
PC
AV
Select the PC/AV mode
for the HDMI source.
AUTO