40
Connecting and Using a Source Device
2
2 Connecting and Using a Source Device
S20D300BY / S20D300H / S20D340H / S20D300HY / S20D340HY / S22D300BY /
S22D300HY / S22D340HY / S22D300NY / S24D300BL / S24D300H / S24D340H /
S24D300HL / S24D340HL
1
Connect the D-SUB cable to the [RGB IN] port on the back of the product and the RGB port on the PC.
2 Connect the DC power adapter to the product and a power socket.
Next, turn on the power switch on the PC. (For details, refer to "2.2.6 Connecting the Power".)
3 Press [ ] to change the input source to Analog.
Provided ports may vary depending on the product.
2.2.2 Connection Using the DVI Cable (S20D300BY / S22D300BY / S24D300BL)
Do not connect the power cable before connecting all other cables.
Ensure you connect a source device first before connecting the power cable.
1 Connect the DVI cable to the [DVI IN] port on the back of the product and the DVI port on the PC.
2 Connect the DC power adapter to the product and a power socket.
Next, turn on the power switch on the PC. (For details, refer to "2.2.6 Connecting the Power".)
3 Press [ ] to change the input source to DVI.
Provided ports may vary depending on the product.
To Next Page
Loading...
