26
2nd 3rd Description
Color Adjust the tint of the screen.
• Color Tone: Select a color tone that best suits your viewing needs.
―
When the external input is connected through HDMI/DP and PC/AV Mode is set to AV (720P @ 60 Hz, 1080P @ 60 Hz and 2160P @ 60Hz), Color Tone has
four color temperature settings (Cool, Normal, Warm and Custom).
• Red: Adjust the red saturation level. Values closer to 100 mean greater intensity for the color.
• Green: Adjust the green saturation level. Values closer to 100 mean greater intensity for the color.
• Blue: Adjust the blue saturation level. Values closer to 100 mean greater intensity for the color.
• Gamma: Adjust the middle level of luminance.
• Saturation: Adjust the saturation level. Values closer to 100 mean greater intensity for the color.
―
This menu is not available when Eye Saver Mode is enabled.
―
The Color feature is only activated at a certain AV resolution, such as 720P @ 60 Hz, 1080P @ 60 Hz and 2160P @ 60 Hz.
Contrast Enhancer Optimize HDMI picture brightness and contrast by adjusting the black level of the video signal.
To Next Page
Loading...
