Samsung S27D590P

64
Setup and Reset
6
6 Setup and Reset
6.6 Source Detection
You can activate Source Detection.
The functions available on the monitor may vary depending on the model. Refer to the actual product.
6.6.1 Configuring Source Detection
1 When the Function Key Guide appears, select [ ] by moving the JOG button UP.
Next, press the JOG button.
2 Move to SETUP&RESET controlling the JOG button UP/DOWN and press the JOG button.
3 Move to Source Detection controlling the JOG button UP/DOWN and press the JOG button.
The following screen will appear.
 Auto: The input source is automatically recognized.
 Manual: Manually select an input source.
4 Move to the desired option controlling the JOG button UP/DOWN and press the JOG button.
5 The selected option will be applied.
SETUP&RESET
Off
Auto
Auto
Manual
Reset All
Eco Saving
Off Timer
PC/AV Mode
Key Repeat Time
Source Detection
Power LED On
Decide how input
sources will be
detected.