Samsung S29E790C

63
DisplayPort Ver.
Select your Displayport. Displayport 1.1 supports High Bit Rate 1, while 1.2
supports High Bit Rate 2.
Sound
Eco Saving Plus
O Timer
PC/AV Mode
DisplayPort Ver.
Source Detection
Key Repeat Time
1.1
1.2
System
Select your
Displayport.
Displayport 1.1
supports HBR 1,
while 1.2 supports
HBR 2.
O
Return
-
The displayed image may differ depending on the model.
―
Incorrect settings may cause the screen to go blank. If this occurs, check the device specifications.
―
If the monitor is in HDMI 1, HDMI 2 or DisplayPort mode and the screen says Check Signal Cable or power saving mode
activates, press the JOG button to display the function-button screen and then select the
icon. You can select 1.1 or 1.2.
Conguring DisplayPort Ver.
1
When the Function Key Guide appears, select by moving the JOG button UP. Next, press the JOG button.
2
Move to System controlling the JOG button UP/DOWN and press the JOG button.
3
Move to DisplayPort Ver. controlling the JOG button UP/DOWN and press the JOG button.
•
1.1 / 1.2
4
Move to the desired option controlling the JOG button UP/DOWN and press the JOG button.
5
The selected option will be applied.