23
2nd 3rd Description
Brightness You can adjust the general brightness of the picture. (Range: 0~50)
A higher value will make the picture appear brighter.
―
This menu is not available when Eye Saver Mode is enabled.
Contrast Adjust the contrast between the objects and background. (Range: 0~50)
A higher value will increase the contrast to make the object appear clearer.
―
This menu is not available when PIP/PBP Mode is enabled.
Sharpness Make the outline of objects more clear or blurry. (Range: 0~20)
A higher value will make the outline of objects clearer.
―
This menu is not available when PIP/PBP Mode is enabled.
Color Adjust the colour saturation levels. Colour saturation intensifies as the value nears 50.
―
This menu is not available when Eye Saver Mode is enabled.
―
This menu is not available when PIP/PBP Mode is enabled.
Tint (G/R) Adjust the ratio of green to red tint levels. Increasing values intensifies the saturation of red and green colours.
―
This menu is not available when PIP/PBP Mode is enabled.
Local Dimming Control the brightness of individual areas on the screen to maximise contrast automatically.
―
This menu is not available when PIP/PBP Mode is enabled.
Contrast Enhancer Automatically balance the contrast to prevent excessive differences between bright and dark areas.
• Off / Low / High
―
This menu is not available when Eye Saver Mode is enabled.
―
This menu is not available when PIP/PBP Mode is enabled.
HDR Tone Mapping Automatically adjusts the brightness with tone mapping processing according to HDR content information.
―
This menu is not available when Eye Saver Mode is enabled.
―
This menu is not available when PIP/PBP Mode is enabled.
To Next Page
Loading...
