Samsung SC18M21 Series User Manual (English)

Questions and Answers:

D
Daniel WebbAug 14, 2025
What to do if my Samsung Vacuum Cleaner stops during use?
- S
  samuel42Aug 14, 2025
  This Samsung Vacuum Cleaner is equipped with a special thermostat to protect the motor from overheating. If it suddenly shuts off, switch it off and unplug it. Inspect the vacuum cleaner for potential overheating causes, such as a full dustbin, hose blockage, pipe obstruction, or clogged filter. Address any identified issues and allow the unit to cool down for at least 30 minutes before attempting to use it again.
J
Jennifer OrtegaAug 17, 2025
What to do if my Samsung SC18M21 motor does not start?
- R
  Robert HullAug 17, 2025
  If the motor of your Samsung Vacuum Cleaner does not start, check the cable, the power plug, and the outlet.
M
mendezstephenAug 21, 2025
How to troubleshoot a Samsung SC18M21 Vacuum Cleaner that won't start?
- A
  ajohnsonAug 21, 2025
  Check the cable, the power plug, and the outlet of your Samsung Vacuum Cleaner.
B
Brooke MarshAug 25, 2025
Why is the suction force of my Samsung SC18M21 Vacuum Cleaner gradually decreasing?
- M
  Michelle SpearsAug 25, 2025
  A decrease in suction force in your Samsung Vacuum Cleaner could be due to a blockage. Check for any obstructions and remove them if found. Also, inspect the filters and clean them as instructed in this manual, if necessary. If the filters are in poor condition, replace them with new ones.
J
James ParrishAug 28, 2025
How to fix static electricity discharge from my Samsung SC18M21 Vacuum Cleaner?
- J
  jon99Aug 28, 2025
  To address static electricity discharge from your Samsung Vacuum Cleaner, try reducing the suction power. Additionally, ensure the room is well-ventilated to maintain normal air humidity.
K
Katherine HendersonAug 31, 2025
How to fix Samsung SC18M21 Vacuum Cleaner cord that does not rewind fully?
- G
  graychristopherAug 31, 2025
  If the cord on your Samsung Vacuum Cleaner does not rewind fully, pull the power cord out 2-3 meters and then press the cord rewind button.
C
cholderSep 3, 2025
Why is the suction force decreasing on my Samsung SC18M21 Vacuum Cleaner?
- C
  Courtney AndradeSep 3, 2025
  A decrease in suction force in your Samsung Vacuum Cleaner may be due to a blockage. Check for any obstructions and remove them if found. Also, inspect the filters and clean them as instructed in the manual, if necessary. If the filters are in poor condition, replace them with new ones.
J
Janice BrownSep 7, 2025
How to fix a Samsung SC18M21 Vacuum Cleaner cord that won't rewind?
- M
  Mr. John HigginsSep 7, 2025
  If the cord of your Samsung Vacuum Cleaner does not rewind fully, pull the power cord out by 2 to 3 meters and then press the cord rewind button.
J
Jacqueline YuSep 10, 2025
Why is my Samsung SC18M21 causing static electricity?
- D
  dustin04Sep 10, 2025
  Static electricity discharge can occur when the air in the room is very dry. To address this with your Samsung Vacuum Cleaner, reduce the suction. Additionally, ventilate the room to normalize the air humidity.