How to troubleshoot a Samsung SC20M25 Vacuum Cleaner when the motor does not start?
If the motor of your Samsung Vacuum Cleaner doesn't start, check the cable, the power plug, and the outlet to ensure they are properly connected and functioning.
What to do if my Samsung Vacuum Cleaner stops during use?
If your Samsung Vacuum Cleaner suddenly shuts off during use, it may be due to the thermostat protecting the motor from overheating. Turn off the switch, unplug the vacuum cleaner, and check for potential overheating sources like a full dust tank, a blocked hose or pipe, or a clogged filter. If any of these conditions are found, fix them and wait at least 30 minutes before attempting to use the vacuum cleaner again.
How to fix a Samsung Vacuum Cleaner cord that doesn't rewind fully?
If the cord of your Samsung Vacuum Cleaner does not rewind fully, pull the power cord out 2 - 3 meters and then press the cord rewind button.
Why is the suction force decreasing on my Samsung SC20M25 Vacuum Cleaner?
A decrease in suction force in your Samsung Vacuum Cleaner may be due to a blockage, clogged filters, or filters that are out of condition. Check for any blockages and remove them. Also, inspect the filters and clean them as instructed in the manual. If the filters are still in poor condition, replace them with new ones.
Why does my Samsung Vacuum Cleaner cause static electricity discharge?
Static electricity discharge from your Samsung Vacuum Cleaner can occur when the air in the room is very dry. To address this, try reducing the suction or ventilate the room to normalize the air humidity.
General| Brand | Samsung |
|---|---|
| Model | SC20M25 Series |
| Category | Vacuum Cleaner |
| Language | English |
To Next Page
