operating the cleaner
02 OPERATING THE CLEANER
Body-control type
To reduce suction for cleaning draperies, small rugs,
and other light fabrics, pull the tap air until the hole is
open.
Press the power control button repeatedly to select the
correct mode.
➞ ➞ ON
To control power level, just slide the power control
button right and left.
MIN = For delicate surface e.g. net curtains.
MAX = For hard floors and heavily soiled carpets.
The indicator lamp will turn red when the dust
pack requires checking of emptying.
If the remote handle control is not working,
the cleaner can be operated using the
control button on the body of the machine.
Press the power control button repeatedly to select
the correct mode.
➞
The ON/OFF button operates the vacuum cleanner or stops it.
The IR light indicates the part that receives the infra-red signal from the handle
control.
The filter light is illuminated when the dust pack requires checking or emptying.
An audio signal will also sound.
ON/OFF
Indicator lamp
To Next Page
Loading...
