What to do if the image on my Samsung SCB-3001 screen is dim?
If the image on the screen is dim, try the following: * Check if the lens is stained with dirt and clean it with a soft, clean cloth. * Ensure that the monitor or DVR is set to the proper condition. * If the camera is exposed to very strong light, consider changing its position.
What to do if the image on my Samsung Security Camera screen is dark?
If the image on the screen is dark, adjust the contrast feature of the monitor or DVR. Also, if you are using an intermediate device, ensure you set the 75 ? / Hi-z properly.
Why does nothing appear on my Samsung SCB-3001 Security Camera screen?
If nothing is appearing on the screen, verify that the power cord and the line connection between the camera and monitor are properly connected. Also, check that you have correctly connected the BNC cable to the camera and inspect the lens type.
Why is my Samsung SCB-3001 Security Camera hot and not working properly?
If the camera is not working properly and the surface is hot, check that you have properly connected the camera to an appropriate power source.
How to fix incorrect color on my Samsung SCB-3001 Security Camera?
To correct the color, check the setting of the WHITE BAL SETUP menu.
Why doesn't the DAY/NIGHT menu work on my Samsung SCB-3001?
If the DAY/NIGHT menu is not working, ensure that the AGC of the EXPOSURE SETUP menu is set to ‘OFF’.
Why is my Samsung SCB-3001 Security Camera screen flickering continually?
If the screen flickers continually, ensure the camera is not pointing towards the sun.
Why doesn't the SENS-UP function work on my Samsung SCB-3001?
If the SENS-UP function isn't working, verify that the AGC of the EXPOSURE SETUP menu is ‘OFF’. Also, check that the SHUTTER of the EXPOSURE SETUP menu is set to ‘A.FLK’ or ‘MANUAL’.
Why doesn't the INTELLIGENCE function work on my Samsung SCB-3001?
If the INTELLIGENCE function is not working, check that INTELLIGENCE of menu is ‘OFF’.
What to do if coaxial communication is not available for my Samsung SCB-3001?
If coaxial communication is unavailable: * Make sure that the camera and monitor are installed within the recommended distance. * If the recommended installation distance is exceeded, use the video amplifier equivalent to coaxitron.
General| Synchronization | Internal |
|---|---|
| Video Output | 1.0 Vp-p |
| Operating Temperature | -10°C to +50°C |
| Signal System | PAL |
| Electronic Shutter Speed | 1/50 (1/60) to 1/100, 000 sec |
| Power Supply | 12V DC |
To Next Page
