17
Three-Touch Dialing
Memory locations 100 through 999 are special Three-Touch
dialing locations.
Example:
For location number 113, briefly press , briefly press
again, then press and hold until the name and number appear
in the display and the number is dialed.
Pause Dialing From a Contacts Entry
•
If you speed dial a contact that contains (two-second) P pause(s)
simply wait for the pauses to pass and the dialing to complete.
•
If you speed dial a contact that contains (hard) W pause(s), wait for the
appropriate prompt(s) from the number you are calling (credit card
number, bank account number, and so on) and enter the appropriate
response(s).
Making a Call — Quick Search Dialing
Use the Quick Search feature to dial any
number stored in your Contacts list by
pressing the number keys that correspond
to the first few letters of a Contact name.
(For more information, refer to “Quick
Search” on page 82.)
Quick Search Dialing a Contact
To find and dial a Contact, do the following:
1. In standby mode, press the number keys that correspond
to the first few letters of the Contact name, as shown.
2. Press the Up navigation key. The
Contact List screen appears
showing the desired Contact name.
3. If needed, use the Up and Down
navigation keys to highlight the
Contact you wish to call.
4. Press to call the highlighted Contact.
Pause Dialing From a Contacts Entry
•
If you voice dial a contact that contains (two-second) T pause(s) simply
wait for the pauses to pass and the dialing to complete.
•
If you voice dial a contact that contains (hard) P pause(s), wait for the
appropriate prompt(s) from the number you are calling (credit card
number, bank account number, and so on) and enter the appropriate
response(s).
Answering a Call
Your phone notifies you of a call in the following ways:
To Next Page
Loading...
