Call Functions 23
Call Another Country — Shortcut Method
1. In Standby mode, press . A plus sign (+) appears in the
display.
Note:
When you press , your phone automatically replaces this + with
011, the three-digit exit code for the United States.
2. Enter the country code for the country that you are calling,
or press until a second plus sign (+) appears in the
display.
Tip:
If you place most or all of your international calls to numbers in the
same country, set-up the International Dialing shortcut to dial that
country’s code for you. (For more information, refer to “International
Dialing” on page 75.)
Note:
When you press , your phone automatically replaces the second +
with the two-digit country code you have selected for the
International Dialing shortcut.
3. Enter the number that you wish to call, then press .
Manual Pause Calling
To manually call a number with pause(s) without storing it in your
Contacts list:
1. In standby mode, enter the number you wish to call.
2. Press
Options
. The following options appear in the display:
• Add 2-Sec Pause
: A 2-second pause after which dialing resumes.
•
Add Wait
: A hard pause (waits for input from you).
3. Highlight and press
OK
to select the desired option.
4. Press
Send
to call the number.
Tip:
Press Save to store pauses along with the number if you plan to call the
number frequently.
To Next Page
Loading...
